Biyernes, Pebrero 3, 2012

Frame Relay


Chapter 11: FRAME RELAY
In data communication, carriers are not really aware for proper data transmission; they prioritize only their sales not knowing that the first most important thing to manage is the transmission of data. Now the frame relay exists in order to improve the data communication in terms of switching and transmitting of data. It can improve the data communication because it has a higher bandwidth that is enough to carry the customer services. The customers can actually demand if they want a higher bandwidth so that they can improve their system. That’s why very important that we know how to manage and used frame relay.

Mostly in our data communication we encountered problems especially during the transmission. The problem like errors, delay and etc. will occur. To lessen this problem the frame relay also is a good solution for this because it uses a high speed communication and low delay networking. They are using fast packet to reduce delay, overhead and even the cost of service has been reduce. Like for example in our project, there is always problem occurs. That’s why we need to find a solution so that the problem is minimizing. The same for the frame relay it will lessen the problems that occur.

The frame relay used in the means of helping the system to send data in a high speed transmission. It has a speed of about 56Kbps-50Mbps for transmitting data. The speed is a very big factor to consider in order to satisfy the clients, and also the clients can do their task easily using the system. And to access the high speed communication they used devices like FRAD or frame relay access devices. I can compare this matter in our personal thinking, if we have delay in our thinking it’s very difficult for us to move forward and do what we want to do. That’s why speed is very important especially in our communication systems.

During the implementation of frame relay their desire was to carry data over Wide Area Network. For this implementation they used revise version of data link protocol. They used this for the efficiency of transmitting, because it will carry the traffic during the operation. This is efficient because error has been eliminated. As we all know efficiency is one of the important things to be considered especially during implementation because it is the basis of the end users to choose what is right for them.

All of this benefits coming from the help of frame relay helps me to really understand how important fast and efficient communication is. All of us communicating always, but we do not consider the fact that this will not happen if proper data communication are not implemented. That’s why we need to know first how to handle data transmission before anything else, like voice processing, because proper data transmission is the most important part of communication.

Source: Broadband Telecommunication Handbook by Regis Bates

Biyernes, Enero 27, 2012

ISDN




ISDN
ISDN or the Integrated Services Digital Network is created in order to improved the switching system in the network and lessen some errors. The switching system becomes much quicker by the used of ISDN because it uses a digital system. The only part of the network that is analog is the local loop. That’s why this ISDN is good to used unlike the switching network before that is all analog. The committee for ISDN has philosophies that specify the customers interface and support their network and because of this the customers get a good benefit on this.
Study Group(SG) created their own expertise related to ISDN.
  1. SG VII on public data networks.
  2. SG VIII terminal equipment for telematic services.
  3. SG XI ISDN and telephone network switching and signaling.
  4. SG XII transmission performance of telephone networks and terminals.
  5. SG XV transmission systems.
  6. SG XVII data transmission over public telephone networks.
  7. SG XVIII digital networks, including ISDN.
This will be considering as the standards and the recommendations CCITT and ITU-T.

The BRI specifies a multifunctional data channel at 16 KBps that could handle signaling and network data. And this BRI was created by the Network Terminal 1(NT1) and this NT1 creates a four wire bus called the T interface into which ISDN device are connected.
We have the interface components used for the telephone systems.
  1. NT1- like the previous statement that NT1 creates the T interface for premise devices.
  2. NT2- this device is for switching.
  3. TE1- capable of dealing with the B and D channel.
  4. TE2- not capable of handling B and D channel.
  5. TA-run the ISDN interface for TE2.
As the book mentioned previously, the ISDN is the solution of the problem regarding the local loop because local loop is designed for voice. We expect it to support 192 KBps bidirectional, this is not really a problem if we had only a few hundred feet but there are not many customers within a few hundred feet of the central office. This is how the ISDN show their physical delivery. This ISDN focuses on how to achieve their goal in order to have the sympathy of their customers by giving them a good communication services.

Application of ISDN NT1 according to the book is that, when it is goes off hook it will transmit a known pattern. This pattern has all possible bit combinations and it has 16 combinations. The transmitter end then monitors the resultant complex signal. Since it knows what it sent and can subtract the signal and it memorizes the resulting reflected energy. The NTI is the one stop and let the central office end do the same thing. Both ends can now simultaneously send data to the party at the other end. But it is hard to listen the relatively weak signal from the other end when you are also talking.
The ISDN interfacing is applicable to those functions including multiple channels, telephone services, digital fax, analog fax, computer and video conferencing, signaling, telemetry, and the packet switching.

Telephone. It serves as the starting point that is using digital system rather than analog. The conversation is being digitalized directly to the source and passes digitally to the network. That’s why it is much clearer then analog.

Digital fax. It uses 64 KBps fax operation and it also digitalized.

Analog fax. IT uses a modem and it has to plug to the telephone.

Computer and video conferencing. It can use one of the 64 KBps or bond both channels together for a 128 KBps digital channel across the network.

Signaling. It is used for setting up and tearing down of the switched bearer channels.

Telemetry. This features is like for the private company that supply energy and uses billings on their services, but this features is not well defined.

Packet Switching. Help those previous applications become much faster in terms of interfacing.




Reference:
1. Broadband Telecommunication Handbook: 2nd edition.